UV Laser Marking Machine
UV Laser Marking Machine
Ultraviolet laser marking machine is mainly based on its unique low-power laser beam. It is especially suitable for the high-end market of ultra-fine processing. UV laser marking machine belongs one of high technology laser marking series. it is developed recently a new laser process technology As tradional laser marking machine adopts heat process technology which will limit the marking fineness. But laser marking is a kind cold working which decrease "heat influence" as more as possible.
APPLICATIONS
As the unique low power advantage of UV laser marking machine, it is used widely for
ultra-fine process high-end market, such as the packing box of cosmec, medicine, food, etc.
The effect is very precise, clear and deep-set. Used for building material, electronic components,
communicaon equipment, gi, plasc buons, glassware, 3C industry, white house appliance etc.
The UV laser marking machine uses UV laser source to output laser, and then through the
high speed scanning galvanometer system, it can be used to print permanent marks on the
surface of various materials.
The effects of marking is:
1. To expose deep maer through the evaporaon of surface maer
2. To engrave traces through the chemical and physical changes of surface maer caused by laser energy, or
3. To burn out some substances by laser energy, and to display the paerns and characters needed to etch.
MAIN CONPONENTS: UV laser source, galvanometer, soware control card, control box and cabinet, water chiller, flat work plaorm placing work pieces (oponal).
| TECHNICAL PARAMETERS | |
|---|---|
| Beam Quality | M2:1.2 (tem00 M) |
| Average Output Power | 3W, 5W (Optional) |
| The Maximum Marking Speed | 1200mm/s |
| Laser Wavelength | 35nm |
| Marking Range | 110x100mm, 150x150mm, 175x175mm |
| Laser Repetition Rate | 20KHz-200KHz (Adjustment) |
| Power Adjustment Range | 5%-100% |
| Minimum Character | 0.2mm X 0.2mm |
| Marking Depth | 0.01-0.2mm (Depending on the material) |
| Repeat Accuracy | 0.001mm |
| Minimum Line Width | 0.013mm |
| Power Consumption Of The Whole Machine | < 600W |
| Cooling System | Water cooling |
| Control Interface | USB |
| Continious Working Time | 24h |
| Power Requirements | AC220V/50Hz/2A |
| MAIN PARTS | ||
|---|---|---|
| Laser Source | 1 Set | CRS Brand UV Laser Source |
| High-speed Galvanometer | 1 Set | UV Laser Marker Special Galvanometer |
| F-theta Lens (Field Lens) | 1 Pcs | F110mm |
| Control System | 1 Set | Industrial Personal Computer |
| Control Software | 1 Set | JCZ Ezcad Marking Controller Software |
| Control Board | 1 Set | JCZ Ezcad Marking Controller Software |
| Water Chiller | 1 Set | Industrial Water Chiller |
